Optimus STAV-3670 - Manual (Page 22)

22
Using the Remote Control
The remote control works up to a distance of about 23 feet, and within a 30-
degree angle on either side of the receiver. Point the control at the receiver’s
front panel and press the desired button(s).
Many buttons on the remote control work the same as buttons on the receiver’s
front panel. Use these buttons exactly as you would use the corresponding but-
tons on the receiver.
AUDIO • SURROUND Switch
Set the switch to AUDIO to control audio components such as CD players or cas-
sette decks. Set the switch to SURROUND when setting the surround sound
options.
When you set the switch to SURROUND , dual-function buttons control the function
marked in gold next to the button. For example, the button marked TEST TONE
and RETURN operates the test tone function when you set the switch to SUR-
ROUND and returns the system to default settings when you set the switch to
AUDIO .
Receiver/Amplifier Operation
Before operation press RECEIVER POWER to select receiver/amplifier operation.
STATION Moves to the next higher or lower station in memory with AU-
DIO
•
SURROUND set to AUDIO .
CLASS Selects the class of the station in memory with AUDIO
•
SUR-
ROUND set to AUDIO .
FM MONO Selects the FM reception mode with AUDIO
•
SURROUND set to
AUDIO . See Page 17.
– REAR LEVEL + Controls the relative volume of the rear speakers. See Page 21.
TAPE 2 MONITOR Switches the receiver to monitor the source connected to the
TAPE 2 MONITOR jacks. See Page 15.
FUNCTION Selects a program source (VCR/TAPE 1, PHONO, TUNER, CD,
or LD/DVD). Repeatedly press
FUNCTION until the display shows
your desired program source. See Page 15.
– CENTER LEVEL + Controls the relative volume of the center speaker. See Page 21.
SURR MODE Selects between Dolby Pro Logic Surround or Simulated Sur-
round sound. See Page 20.
MUTING Silences the receiver. Press again to restore the sound to its pre-
vious level. See Page 17.
TEST TONE Sounds test tones from each speaker with AUDIO
•
SURROUND set
to SURROUND . See Page 21.
RETURN Returns the receiver to its default settings with AUDIO
•
SUR-
ROUND set to AUDIO . See Page 24.
CENTER MODE Selects among the three center modes or 3CH Logic. See Page
21.
DELAY TIME Sets the rear-channel delay for Dolby Pro Logic Surround and
Simulated Surround programs with
AUDIO
•
SURROUND set to
SURROUND . See Page 21.
S. BASS Enhances bass sound with AUDIO
•
SURROUND set to AUDIO .
+ MASTER VOLUME –Adjusts the system’s volume. See Page 15.
RECEIVER POWER Turns the receiver on and off. See Page 15.
Using the Remote Control
Receive
Amplifie
Section
CD
SURROUND
ASMS
TAPE
POWER
RECEIVER CD TAPE
MASTER
VOLUME
RANDOM DISC BEST
AUDIO
DECK1 DECK2
STATION
REAR
LEVEL
FM MONO
FUNCTION
CENTER
LEVEL
CLASS
TAPE2
MONITOR
CENTER MODE
MUTING
TEST TONE
RETURN
DELAY TIME
S.BASS
AUDIO/VIDEO
SYSTEM REMOTE OSR
SURR
MODE
AUDIO
•
SURROUND
Receiver/
Amplifier
Section
RECEIVER
POWER