Onkyo CR-305TX - Manual (Page 28)

28
Programming to play at a specified time
The clock of this unit must be set correctly before programming the
timer. Before using the timer for listening to or recording broadcast
programs, you need to store the preset stations. (Refer to “Presetting
your favorite stations” on page 23 for information how to preset
stations.)
1. Press the TIMER button repeatedly until “WEEKDAY” or
“WEEKEND” is displayed, and press the ENTER button.
2. Press the buttons to set the ON time, and press the EN-
TER button.
Note
When you store the ON time, the display automatically indicates
that the OFF time is one hour after the ON time you specified.
3. Press the buttons to select the OFF time, and press the
ENTER button.
4. Press the buttons to select the source, and press the EN-
TER button.
Each time you press the
buttons, the display changes as fol-
lows.
U.S. and Canadian models: FM, AM, CD, CDR, TAPE
Asian and European models: FM, AM, CD, MD, CDR, TAPE
If you select “FM” or “AM”, press the buttons again to se-
lect the preset number and press the ENTER button.
5. Press the STANDBY/ON button on the remote controller to
set the Standby mode.
Note
• Make sure that the specified source component is connected to
this unit, and that the MD, CD-R, or cassette tape has been in-
serted into the appropriate component.
1
2
3
Using the timer
ENTER
TIMER
STEREO TIMER
W.DAY
ENTER
STEREO TIMER
W.DAY
ENTER
4
TIMER
W.DAY
ENTER
5
TIMER ENTER
VOL UME UP
VOL UME DOW N
REMOTE CONTROLLER
STANDBY/ON INPUT
TIMER ENTER
RANDOM
MEMORY REPEAT CD
PLAY MODE
SLEEP A.PRESENCE
CLOCK
CALL MUTING
REPEAT MD
VOLUME
PLAY MODE REPEAT
TUNER PRESET
CDR
TAPE
SCROLL
RC-421S
STANDBY/ON
STEREO TIMER
W.DAY
REC
STANDBY/ON