Omron Healthcare HEM-637 - Manual (Page 8)

15
Date and Time Setting
Continued
7. Push the SET button.
8. Set the Hour and Minute.
The hour can be set between 12 A.M. and 11 A.M.,
and 12 P.M. and 11 P.M..
Flashing Screen
of Hour AM 12
Example of setting the time at the time tone for 8 A . M .
1. Set the hour to AM 8 in advance.
2. Set the minute display to flashing 59, and push
the button on the instant when the time tone
is heard.
• At the moment you push the arrow button,
the time is set to 00 seconds and matches
with the time tone.
3. Minute is indicated by flashing display of 00.
9. Lock the setting.
• Push the SET button.
Flashing Screen
of Hour AM 8
Flashing Screen
of Minute 59
Screen of 8 A . M .
on January 25, 2002
14
Date and Time Setting
Time Screen
1. Push the SET button while the power
is turn off.
Keep pressing the button until the Time Screen
is displayed.
• The year in Gregorian calendar is shown in
flash display as the Time Screen appears.
2. Push the button to set the year to the
current year in Gregorian calendar.
3. Push the SET button.
4. Push the button to set the Month to the
current month.
5. Push the SET button.
6. Push the button to set the Day to the
current day.
Setting the date and time is recommended before use of the monitor for continuous
blood pressure management
This blood pressure monitor automatically stores 90 measurement values. If you use
the monitor without setting the date and time correctly, the measured values will
be stored with the wrong date and time.
In the following cases, it is necessary to set the date and time:
• When you use the monitor for the first time
• After replacing the batteries
• After reset settings
HEM-637 REV A 8188 1/26/06 1:41 PM Page 14