Omron Healthcare HEM-637 - Manual (Page 7)

13
Alarm Setting
Continued
• Once the first alarm time is locked, the second
alarm time of Hour and PM 8 flashes.
In the same manner, set the hour for the second
time and
(to go off).
3. Lock the setting.
If you are also going to change other settings,
push the SET button to lock the setting.
• When you push the SET button, the display
changes to the Time Screen.
If you want to finish by locking the setting, push
the START/STOP button to turn off the power
.
Screen of setting the alarm to
go off at 6:30 A . M . and 8 P . M .
Screen of indicating that
the alarm is sounding
12
You can set the alarm to go off twice a day at a specified time in the
morning and evening.
• You can stop the alarm by pushing any of the buttons of this blood pressure
monitor.
• Alarm will stop automatically after sounding for 2 minutes.
• Alarm will not sound when this monitor is in use, such as for measurement,
the Memory Call Screen, and the Graph Call Screen.
1.
Push the SET button while the power
is turned off.
Keep pressing the button until the Alarm
Screen is displayed
.
2.
Set the Alarm.
• The initial setting is (not to go off) at the
time of your purchase.
Alarm Screen
Example of Alarm setting (If you want to set the
alarm to go off at 6:30 A.M. and 8 P.M.)
Push the button to set the Hour to AM 6.
Push the SET button to lock the Hour.
• Minute will flash.
Push the button to set the Minute to 30.
Push the SET button to lock the Minute.
• Each time you push the button, the display
changes in the regressive order, such as 59
and 58.
• If you keep pressing the button, Minute will
change fast forward.
• The mark flashes.
Push either or to change from (not to go
off) to (to go off), then push the SET button
to lock the setting .
Alarm Setting
HEM-637 REV A 8188 1/26/06 1:41 PM Page 12