Oricom TP30 - Manual (Page 7)

5
Wall Mounting
Wall Mounting
Desk Mounting
Fit the bracket as shown in the illustration. Insert the brackets three tabs
into the matching slots on the bottom of the phone and click into place.
Caution: Before installing or changing
the battery, make sure that the
telephone is not connected to the
telephone network or the mains power.
Made in China
Wall Mounting
1. Fit the bracket as shown in the illustration. Insert the braqckets three tabs
into the matching slots on the bottom of the phone and click into place.
%SJMMUXPIPMFTWFSUJDBMMZ
POFBCPWFUIFPUIFS
NNBQBSU
BOEMFBWF
the screws protruding from the wall by 5mm.
3. Turn around the handset hook (located by the hook switch) by 180
degress, so it will hold the handset in place when the phone is
mounted on the wall.
4. Position the mounting holes on the base of the phone over the two
protruding screws on the wall plate or on the wall. Gently push the
phone flush against the wall plate then slide the phone downwards
locking it into place.
Bracket postion for
desk mounting
Bracket postion for
wall mounting