Oricom TP30 - Manual (Page 12)

10
Operation
If you want to talk to the caller:
1. Pick up the handset or press button to answer the call.
2. At the end of the call, return the handset to the cradle or press .
Redial function
The last number dialled will be saved in the telephone automatically. To use
the redial facility, proceed as follows:
1. Lift the handset or press button .
2. Press the REDIAL button. The last saved redial number will now be dialled.
Pause
If needed for phone banking or behind a PBX system, you can insert a 3.6
second pause while dialing or storing a number into MEM. Press REDIAL
button at the desired point in number to insert a pause.
Recall and call waiting
Press the Recall button followed by the extension number to transfer
calls when connected to a PBX (TBR only).
Access to additional network services can be gained by using the Recall
button, * and # keys. Contact your network operator for more information.
The recall button timing can be switched between either 100ms (AUS) /
600ms (NZ), using the Recall switch located on the rear side of the handset.
To Turn on Telstra call waiting (Australia)
You can use the recall button to answer a second call while you are on
the phone. However this service will need to be turned on. For example to
turn on Telstra's Call Waiting service:
1. Lift the handset and wait for dial tone then Press *43#.
2. You will hear the service message and then hang up.