One for All Kameleon URC-6690 - Manual (Page 11)

O WNER ’ S M ANUAL
Programming Combo Device Control 9
3. Press and hold SET until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
4. Use the Manufacturer’s Codes (starting
on page 21) to locate the type of device
and brand name and then enter the
first four-digit code for your device. If
performed correctly, the Inner IR
segments blink twice.
NOTE: If the Inner IR segments did not blink
twice, repeat steps 2 through 4 and try
entering the same code again.
5. Aim the remote control at the device
and press POWER once. The device
should turn off. If it does not respond,
repeat steps 2 through 5, trying each
code for your brand until you find one
that works. If it still does not work, try
Searching For Your Code.
NOTE: If the device does not respond to the
POWER key, press Vol+ or the Play key..
6. Repeat steps 1 through 5 for each
device you want to control. For future
reference, write down each working
device code in the boxes below:
PROGRAMMING COMBO
DEVICE CONTROL
You can set the OFA Kameleon™ 6-Device
Hybrid Remote (URC-6690) to control your
combo devices such as TV/VCR, TV/DVD,
Satellite/DVR, Home-Theater-In-A-Box,
and many others with a single code. For a
complete list of combo devices, refer to the
“Device Table” on page 6.
NOTE: Some combo device types have codes
that you can program on separate device
keys. For example, you can program DVD
Player/VCR Combo codes under the
VCR/PVR or DVD mode keys. See Setup
Codes for DVD/VCR Combos on page 28;
note that there are two sections under this
device type.
Perform the following instructions to
control a TV/DVD Combo:
1. Turn on the TV/DVD Combo and
insert a DVD.
NOTE: Please read steps 2 through 4
completely before proceeding. Highlight or
write down the codes and device you wish
to program before starting step 2.
2. On the remote control, press TV.
3. Press and hold SET until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
4. Use the Setup Codes under the TV/
DVD Combos heading (use codes
listed as “TV Codes”) on page 35.
Locate the brand name and then enter
the first four-digit code for your
device. If performed correctly, the
Inner IR Segments will blink twice.
TV Code:
AUX Code:
AUX. Device Type:
__________________________
CBL/SAT Code:
DVD Code:
AUD Code:
VCR/PVR Code:
OFA Kam 6 Hybrid Owners Manual.fm Page 9 Wednesday, March 30, 2005 3:09 PM