Configurable items and default values, Bold is the default setting – Oki lan 8100e User Manual
Page 62
OkiLAN 8100e Network User’s Guide
Configuration - 62
Configurable items and Default Values
Bold is the default setting.
Ref. No.
Admin
Manager
Web browser
TELNET/
Diagnostic
test print
Available
options
Notes
TCPIP-1
[OKI Device
Setup]-
[TCP/IP]-
[Use TCP/IP
Protocol]
[Network
Configuration]-[
General
Settings]-[Protoc
ol Options]-[TCP/
IP]
[Setup TCP/
IP]-
[TCP/IP
protocol]
ENABLE/
DISABLE
Set TCP/IP
protocol,
enabled/
disabled
TCPIP-2
[OKI Device
Setup]-
[TCP/IP]-
[IP Address]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[IP
Address]
[Setup TCP/
IP]-[IP addres
s]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set IP
address
TCPIP-3
[OKI Device
Setup]-
[TCP/
IP]-[Subnet
Mask]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[Subne
t Mask]
[Setup TCP/
IP]-[Subnet
mask]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set subnet
mask
TCPIP-4
[OKI Device
Setup]-
[TCP/
IP]-[Default
Gateway]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[Defaul
t Gateway]
[Setup TCP/
IP]-[Gateway
address]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set
gateway
(default
route).
TCPIP-5
[OKI Device
Setup]-
[TCP/IP]-
[Use RARP]
[Network
Configuration]-[T
CP/IP]-[Method
for assigning IP
Address]-[RARP]
[Setup TCP/
IP]-[RARP
protocol]
ENABLE/
DISABLE
SET RARP
function,
enabled/
disabled
TCPIP-6
[OKI Device
Setup]-[TCP
/IP]-[Use
DHCP/
BOOTP]
[Network
Configuration]-[T
CP/IP]-[Method
for assigning IP
Address]-[DHCP/
BOOTP]
[Setup TCP/
IP]-[DHCP/
BOOTP
protocol]
ENABLE/
DISABLE
Set DHCP
function,
enabled/
disabled
TCPIP-7
[OKI Device
Setup]-
[TCP/IP]-
[DNS
Server...]
-[Primary
Server]
[Network
Configuration]-[T
CP/IP]-[Fixed IP
Address
Settings]-[DNS
Server Address
(Pri.)]
[Setup TCP/
IP]-
[DNS
server(Pri.)]
0.0.0.0—
255.255.255.25
5 (0.0.0.0)
Set IP
address for
primary
DNS server