Oki lan 8100e - Manual (Page 40)

OkiLAN 8100e Network User’s Guide
Configuration - 40
Printer Trap
Setup . . . Detail . . . Cover Open Set sending a Trap,
enabled or
disabled, when the
printer cover
opens.
Printer Error Set sending a Trap,
enabled or
disabled, when any
errors occur.
IPX Set node address and network address
to which a Trap packet will be sent.
Detail . . . By selecting the button, the following
dialogue box is displayed:
bmp39.bmp
In the dialogue box, the following items
can be configured:
Trap Enable
Set sending a Trap
packet, enabled or
disabled, for each
destination.
On-line Set sending a Trap,
enabled or
disabled, when the
printer turns to
On-Line.
Off-line Set sending a Trap,
enabled or
disabled, when the
printer turns to
Off-Line.
Paper Out Set sending a Trap,
enabled or
disabled, when
paper is out.
Paper Jam Set sending a Trap,
enabled or
disabled, when a
paper jam occurs.
Location Comments