Snmp tab – Oki lan 8100e User Manual

Page 38

Text mode
Original mode

OkiLAN 8100e Network User’s Guide

Configuration - 38

SNMP Tab

This allows you to configure SNMP related items.

bmp31.bmp

Location

Comments

Authentic
Community

This community name is used to check whether incoming
SNMP requests have the correct community name or not.
The community name is displayed as ****** for security
reasons.

TRAP
Community

This community name is assigned to outgoing system traps
such as cold start, authentication failure, etc.

TRAP Address Set a destination IP address of a Trap packet. If 0.0.0.0 is

set, the Trap is disabled.

SysContact

Set SysContact (printer manager) name.

SysName

Set SysName (printer model name).

SysLocation

Set SysLocation (the location where the printer is
installed).

Default TTL

Set TTL (Time To Live) value.

Enable
Authentic Trap

Set Authentic Trap to enabled/disabled.