Radio Shack CID-941 - Manual (Page 16)

16
• If you connect another type of Caller ID module
that has Call Waiting (other than a CID-941) to
the same phone line as your CID-941’s, the Call
Waiting signal can be garbled or not received.
Connecting to a Two-Line Phone
To record information about calls received on a two-
line phone, you need two CID-941’s and an optional
triplex adapter (available at your local RadioShack
store). Each system only records information about
calls received on the line to which it is connected.
Follow these steps to connect two systems to a two-
line phone.
1. Unplug your telephone’s modular cord from the
wall jack and plug it into L1+L2 on the triplex
adapter.
2. Plug the triplex adapter into the wall jack.
3. Plug one end of the supplied modular cord into
the TEL LINE jack on one of the systems.
43-941.fm Page 16 Friday, January 28, 2000 10:34 AM