RCA 27F524T - Manual (Page 12)

DIG•ANA
GUIDE
+•?
CH LIST
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
OK button
Arrow
buttons
Use the Remote Control to
Complete the Initial Setup
The technical term is “Navigation” - how you move through the
on-screen menus. The method is the same throughout the menu
screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the remote to
highlight one of the items listed on the screen. Use the up or down
arrow button to move up or down. Use the right or left arrow button
to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from
other menu items on the list (appears darker, brighter or a
different color).
Plug in the TV and Turn It On
Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into
the outlet. Press ON•OFF on the remote, or press POWER on the TV’s front panel.
Put Batteries in the Remote
• Remove the battery compartment cover from the back of the remote by pushing down
and sliding off the cover.
• Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly to the
diagram inside the battery compartment.
• Replace the cover.
Note: If you won’t need to use your remote for a long period of time, remove the
batteries to avoid damage due to possible leakage.
Connections & Setup
10 Chapter 1