RCA 25415 - Manual (Page 10)

10
Intercom Auto Answer
For “hands-free” operation, the phone can be set to answer an intercom call by automatically activating the speaker.
TIP: You may also use this feature for room monitoring.
1. Press the MENU button while in standby mode.
2. Use the < REVIEW > button to scroll to
SET PHONE OPTIONS.
3. Press the SELECT/SAVE button.
4. Use the < REVIEW > button to scroll to INTERCOM AUTO ANS.
5. Press the SELECT/SAVE button.
6. Use the < REVIEW > button to choose
YES or NO.
7. Press the SELECT/SAVE button to save.
Flash Time
1. Press the MENU button while in standby mode.
2. Use the < REVIEW > button to scroll to
SET PHONE OPTIONS.
3. Press the SELECT/SAVE button.
4. Use the < REVIEW > button to scroll to
SET FLASH TIME.
5. Press the SELECT/SAVE button.
6. Use the < REVIEW > button to scroll through the flash time options. You may choose 100ms or 600ms.
7. Press the SELECT/SAVE button to save.
NOTE: You may press the EXIT button at any time to exit.
Call Alert Tone
Turn on the Call Alert to hear a tone for incoming calls while you are on the telephone. This function notifies you that there is a incoming
call while you are using the phone. If you do not want this tone to disturb your conversation, you can set it to OFF.
1. Press the MENU button while in standby mode.
2. Use the < REVIEW > button to scroll to
SET PHONE OPTIONS.
3. Press the SELECT/SAVE button.
4. Use the < REVIEW > button to scroll to CALL ALERT TONE.
5. Press the SELECT/SAVE button.
6. Use the < REVIEW > button to scroll to
ON or OFF.
7. Press the SELECT/SAVE button to save. The cursor automatically moves to LINE 2.
8. Repeat steps 6 and 7 for each telephone line. After you select a tone for Line 4, press the EXIT button.
No Unknown/Blocked
This option allows you to decide whether the unknown or blocked caller ID calls are saved or not. If you select YES, the unknown or blocked
calls will be saved.
1. Press the MENU button while in standby mode.
2. Use the < REVIEW > button to scroll to
SET PHONE OPTIONS.
3. Press the SELECT/SAVE button.
4. Use the < REVIEW > button to scroll to NO UNKNOWN/BLOCKED.
5. Press the SELECT/SAVE button.
6. Use the < REVIEW > button to scroll to
YES or NO. The default is YES.
7. Press the SELECT/SAVE button to save.
Programming the Telephone