RCA HD Receiver - Manual (Page 25)

Using the Remote
23
GO BACK Moves you back and forth between the last two channels selected during
either DIRECTV or TV viewing. For example, if you have been viewing both DIRECTV and
TV channels, pressing GO BACK while watching a DIRECTV channel moves you back to the
last DIRECTV channel you viewed. Pressing it while watching a TV channel moves you to
the last TV channel you viewed. In the menu system, pressing GO BACK returns you to the
previous menu screen.
GUIDE While viewing TV broadcasts, brings up the TV program guide. While viewing
DIRECTV broadcasts, brings up the DIRECTV ® programming guide. Subsequent presses of
the GUIDE button toggle through the different types of guides.
INFO Brings up channel and viewing information via the channel banner. Quickly press
again to bring up an extended channel banner and a third time to remove the banner.
Press when in the program guides to get more information on the highlighted program
or channel.
ARROWS Use to highlight different items in the menu system and adjust the menu
controls.
OK When in the menu system and other on-screen displays, selects highlighted items.
MENU Brings up the main menu and selects highlighted items. When using an RCA, GE
or PROSCAN VCR and in VCR mode, it functions as a PROGRAM button.
CLEAR Removes on screen displays and returns to normal viewing.
DIGIT BUTTONS (0 - 9) Enter channel numbers directly though the remote control. For
more information on entering digits to change channels, see the section “Basic
Operation.” When in the menus, the digit buttons can be used to directly select items
without using the arrows. 0 can be used to return to the previous menu screen.
INPUT Toggles between the HD receiver’s TV and DIRECTV program viewing.
ANTENNA Switches the source of the TV input signal between the HD receiver’s
ANTENNA A and B. When programmed and in VCR mode, the ANTENNA button functions
as a TV/VCR button.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport
control for some remote-controllable VCRs, DVD players, laserdisc players, tape decks, and
CD players.
Don’t worry about
getting stuck inside a
menu. Pressing the
CLEAR button on the
remote control takes you
out of the menu system
and back to the program
you were watching.