Roland MIDI Implementation F-120R - Manual (Page 17)

MIDI Implementation
17
5. Eff ect List
0100: Equalizer
0101: Spectrum
0102: Enhancer
0104: Isolator
0105: Low Boost
0106: High Pass Filter
0110: Overdrive
0111: Distortion
0112: Overdrive2
0113: Distortion2
0107: Speaker Simulator
0114: Guitar Amp Simulator
0120: Phaser
0129: Multi Stage Phaser
012a: Infi nite Phaser
0123: Stereo Flanger
0127: 3D Flanger
0128: 2Band Flanger
0121: Auto Wah
0103: Humanizer
012b: Ring Modulator
0125: Tremolo
0126: Auto Pan
012c: Slicer
0130: Compressor
0131: Limiter
0142: Stereo Chorus
0140: Hexa Chorus
0141: Tremolo Chorus
0143: Space D
0144: 3D Chorus
0145: 2Band Chorus
0122: Rotary
012d: Rotary2
0300: Rotary Multi
015b: Stereo Delay1
015c: Stereo Delay2
015d: Stereo Delay3
015e: Stereo Delay4
015f: Stereo Delay5
0150: Monaural Delay
0151: Modulation Delay
0152: Triple Tap Delay
0157: 3D Delay
0159: Tape Echo
015a: Reverse Delay
0172: Lo-Fi
0175: Telephone
0156: Gate Reverb
0200: Overdrive->Chorus
0201: Overdrive->Flanger
0202: Overdrive->Delay
0203: Distortion->Chorus
0204: Distortion->Flanger
0205: Distortion->Delay
0206: Enhancer->Chorus
0207: Enhancer->Flanger
0208: Enhancer->Delay
0209: Chorus->Delay
020a: Flanger-> Delay
020b: Chorus-> Flanger
■ EFX Parameter Map
The parameters with”#1” or “#2” at the end of parameter name can be controlled with
each exclusive message”Part EFX CONTROL 1” and “Part EFX CONTROL 2.”
●0100: Equalizer
This is a four-band stereo equalizer (low, mid x 2, high).
No Parameter Value Description
1 Low Freq 0–1 200, 400 Hz Frequency of the low range
2 Low Gain #1 0–30 -15–+15 dB Gain of the low range
3 Mid1 Freq 0–16 200–8000 Hz
Frequency of the middle
range 1
4 Mid1 Gain 0–30 -15–+15 dB Gain of the middle range 1
5 Mid1 Q 0–4
0.5, 1.0, 2.0,
4.0, 8.0
Width of the middle range 1
Set a higher value for Q
to narrow the range to be
aff ected.
6 Mid2 Freq 0–16 200–8000 Hz
Frequency of the middle
range 2
7 Mid2 Gain 0–30 -15–+15 dB Gain of the middle range 2
8 Mid2 Q 0–4
0.5, 1.0, 2.0,
4.0, 8.0
Width of the middle range 2
Set a higher value for Q
to narrow the range to be
aff ected.
9 High Freq 0–2
2000, 4000,
8000 Hz
Frequency of the high range
10 High Gain #2 0–30 -15–-+15 dB Gain of the high range
11 Level 0–127 0–127 Output Level
●0101: Spectrum
This is a stereo spectrum. Spectrum is a type of fi lter which modifi es the timbre by
boosting or cutting the level at specifi c frequencies.
No Parameter Value Description
1
Band1
(250Hz)
0–30
-15–+15 dB Gain of each frequency band
2
Band2
(500Hz) #1
0–30
3
Band3
(1000Hz)
0–30
4
Band4
(1250Hz) #2
0–30
5
Band5
(2000Hz)
0–30
6
Band6
(3150Hz)
0–30
7
Band7
(4000Hz)
0–30
8
Band8
(8000Hz)
0–30
9 Q 0–4
0.5, 1.0, 2.0,
4.0, 8.0
Simultaneously adjusts the
width of the adjusted ranges
for all the frequency bands.
10 Level 0–127 0-127 Output Level