Roland MIDI Implementation F-120R - Manual (Page 16)

MIDI Implementation
16
●Example of an Exclusive Message and Calculating a
Checksum
Roland Exclusive messages are transmitted with a checksum at the end (before F7)
to make sure that the message was correctly received. The value of the checksum is
determined by the address and data (or size) of the transmitted exclusive message.
❍ How to Calculate the Checksum (Hexadecimal
Numbers are Indicated by ‘H’)
The checksum is a value derived by adding the address, size and checksum itself and
inverting the lower 7 bits.
Here’s an example of how the checksum is calculated. We will assume that in the
exclusive message we are transmitting, the address is aa bb ccH and the data or size
is dd ee ff H.
aa + bb + cc + dd + ee + ff = sum
sum / 128 = quotient ... remainder
128 - remainder = checksum
(However, the checksum will be 0 if the remainder is 0.)
Setting REVERB MACRO to ROOM 3
According to the “Parameter Address Map,” the REVERB MACRO Address is 40 01 30H,
and ROOM
3 is a value of 02H. Thus,
F0 41 10 42 12 40 01 30 02 ?? F7
(1) (2) (3) (4) (5) Address data Checksum (6)
(1) Exclusive Status, (2) ID (Roland), (3) Device ID (17),
(4) Model ID (GS), (5) Command ID (DT1), (6) End of Exclusive
Next we calculate the checksum.
40H + 01H + 30H + 02H = 64 + 1 + 48 + 2 = 115 (sum)
115 (sum) / 128 = 0 (quotient) ... 115 (remainder)
checksum = 128 - 115 (remainder) = 13 = 0DH
This means that F0 41 10 42 12 40 01 30 02 0D F7 is the message we transmit.
●About Tuning
In MIDI, individual Parts are tuned by sending RPN #1 (Master Fine Tuning) to the
appropriate MIDI channel.
In MIDI, an entire device is tuned by either sending RPN #1 to all MIDI channels being
used, or by sending a System Exclusive MASTER TUNE (address 40 00 00H).
RPN #1 allows tuning to be specifi ed in steps of approximately 0.012 cents (to be
precise, 100/8192 cent), and System Exclusive MASTER TUNE allows tuning in steps of
0.1 cent. One cent is 1/100th of a semitone.
The values of RPN #1 (Master Fine Tuning) and System Exclusive MASTER TUNE are
added together to determine the actual pitch sounded by each Part.
+----------+--------+---------------+--------------------+
| Hz in A4 | cent | RPN #1 | Sys.Ex. 40 00 00 |
+----------+--------+---------------+--------------------+
| 445.0 | +19.56 | 4C 43 (+1603) | 00 04 0C 04 (+196) |
| 444.0 | +15.67 | 4A 03 (+1283) | 00 04 09 0D (+157) |
| 443.0 | +11.76 | 47 44 (+ 964) | 00 04 07 06 (+118) |
| 442.0 | +7.85 | 45 03 (+ 643) | 00 04 04 0F (+ 79) |
| 441.0 | +3.93 | 42 42 (+ 322) | 00 04 02 07 (+ 39) |
| 440.0 | 0.00 | 40 00 ( 0) | 00 04 00 00 ( 0) |
| 439.0 | -3.94 | 3D 3D (- 323) | 00 03 0D 09 (- 39) |
| 438.0 | -7.89 | 3A 7A (- 646) | 00 03 0B 01 (- 79) |
+----------+--------+---------------+--------------------+
Frequently used tuning values are given in the following table for your reference.
Values are in hexadecimal (decimal in parentheses).
Set the tuning of MIDI channel 3 to A4 = 442.0 Hz
Send RPN#1 to MIDI channel 3. From the above table, the value is 45 03H.
B2 64 00 MIDI ch.3, lower byte of RPN parameter number: 00H
(B2) 65 01 (MIDI ch.3) upper byte of RPN parameter number: 01H
(B2) 06 45 (MIDI ch.3) upper byte of parameter value: 45H
(B2) 26 03 (MIDI ch.3) lower byte of parameter value: 03H
(B2) 64 7F (MIDI ch.3) lower byte of RPN parameter number: 7FH
(B2) 65 7F (MIDI ch.3) upper byte of RPN parameter number: 7FH
●The Scale Tune Feature (Address: 40 1x 40)
The scale Tune feature allows you to fi nely adjust the individual pitch of the notes
from C through B. Though the settings are made while working with one octave,
the fi ne adjustments will aff ect all octaves. By making the appropriate Scale Tune
settings, you can obtain a complete variety of tuning methods other than equal
temperament. As examples, three possible types of scale setting are explained below.
❍ Equal Temperament
This method of tuning divides the octave into 12 equal parts. It is currently the most
widely used form of tuning, especially in occidental music. On this instrument, the
default settings for the Scale Tune feature produce equal temperament.
❍ Just Temperament (Keytone C)
The three main chords resound much more beautifully than with equal tempera-
ment, but this benefi t can only be obtained in one key. If transposed, the chords tend
to become ambiguous.
The example given involves settings for a key in which C is the keynote.
❍ Arabian Scale
By altering the setting for Scale Tune, you can obtain a variety of other tunings suited
for ethnic music. For example, the settings introduced below will set the unit to use
the Arabian Scale.
Example Settings
Note name Equal Temperament Just Temperament Arabian Scale
(Keytone C)
C 0 0 -6
C# 0 -8 +45
D 0 +4 -2
D# 0 +16 -12
E 0 -14 -51
F 0 -2 -8
F# 0 -10 +43
G 0 +2 -4
G# 0 +14 +47
A 0 -16 0
A# 0 +14 -10
B 0 -12 -49
The values in the table are given in cents. Refer to the explanation of Scale Tuning to
convert these values to hexadecimal, and transmit them as exclusive data.
For example, to set the tune (C-B) of the Part1 Arabian Scale, send the data as follows:
F0 41 10 42 12 40 11 40 3A 6D 3E 34 0D 38 6B 3C 6F 40 36 0F 50 F7