Ruby Tech PM0426-13 User Manual

Page 4

Site Preparation

In determining the location for your

Megatouch Ion™ video game, consideration

must be given to a suitable, grounded elec-

trical outlet. Since the game is a computer-

ized device, it should have a separate cir-

cuit, if at all possible. If a separate circuit is

not available, care should be taken to pro-

vide a clean and constant voltage. As a

basic guideline, never connect the unit to a

circuit that also supplies power to freezers,

coolers or other high power consuming and

electrical noise generating equipment. Place

the game in a location where nothing will

interfere with proper ventilation. The game

should not be exposed to any dripping or

splashing liquids. Objects filled with liquid

should not be placed on the unit.

Setting up your Megatouch Game

After removing the game from the car-

ton, attach the power cord to the back

of the game near the ON/OFF switch.

Plug the game into a standard AC out-

let.

Turn the power switch at the back of

the game to ON and wait for it to go

through its boot-up sequence. The

game will display the Main Menu Screen.

If you have a Mega-Lease™ game, you

must follow the steps in the MegaNet®

User Manual to connect to the server

in order to activate your game.

The machine has been preset at the

factory and therefore should not need

to be adjusted, however it is recom-

mended that the screen be calibrated

(see Screen Calibration) and the coin

or bill acceptor(s) be tested.

There are many custom settings avail-

able for the game. To customize the

settings, follow the software instruc-

tions in this manual.

Game Description

The Megatouch EVO model has 2 key-locked

compartments: the CPU section door and the

cash tower section. It comes equipped with

a coin mech and/or bill acceptor. This model

also has couplers installed in the rear of the

game. These are used for future hardware

upgrades which include linking and modem

capabilities. Each game comes equipped

with a wireless USB adapter which can be

used to wirelessly link two Ion games to-

gether by simply turning the games on. With

the addition of a wireless router, up to four

games can be linked and the game(s) can

also connect to the Internet. The Linksys

802.11B router is recommended. For more

information, see Wireless Setup.

The EVO also has several additional wall

mounting kits, including a direct, recessed,

and swivel bracket wall mount. There is

also an available stand on which to place

the game. Contact your distributor to pur-

chase any of these additional parts.

CPU Section

The CPU section is accessible from the front

of the game. The CPU section houses the

LCD monitor, motherboard, I/O board, power

supply, hard drive, and the main harness.

Located on the control board (found inside

the CPU section near the hinge of the CPU

section door) are two internal switches,

SETUP and CALIBRATE (see Figure 24).

Pressing the SETUP button will bring you to

the Megatouch Setup Screen. See the next

section for calibration instructions.

NOTE: Additional “SETUP” and “CALI-
BRATE” buttons can be accessed
through the back of the CPU section,
by unlocking the cash tower lock (see
Figure 25).

Cash Tower Section

The coin mech/coin box/bill acceptor are ac-

cessible from the rear of the cabinet. The

cash tower is locked for security purposes.

See Figure 25.

1 MEGATOUCH EVO ION OWNER’S MANUAL PM0426-13