RoyalTek RN1 User Manual
Page 14
14
Figure 2-3-3
5.
Charging your RN1 device.
a. Plug the car charger to the 12 V outlet of your car and then connect the charger cable to the Mini
USB port of the RN1 car holder；Please make sure the battery switch status in “ON” mode. (See
Figure 2-3-4)
b. You now can let your RN1 have the continuous power by the car charger.
Figure 2-3-4
NOTE:
Your car may be required to switch the vehicle ignition into the accessories position to power
the cigarette lighter. Your RN1 will not charge with the ignition off.
6.
Starting your RN1
a.
Push the battery switch ON.(Default status OFF)
b.
Press the power button to turn on your RN1, then the main menu screen appears.
c.
Tap Navigation, you will see the map screen displayed.
d.
Please read the User’s Guide of Navigation software for the detail setting information.
Please be noted, the first time turning on your RN1 may take some time to obtain a valid GPS fix.