RCA LCDS2022B - Manual (Page 11)

Connections & Setup
Chapter 1 7 Graphics contained within this publication are for representation only.
RGB/YPbPr
Audio Out
Audio In
+12V Output
VID2
Using VID2
Connect a component, such as a DVD player or digital cable box, to the TV using the VID2
jacks. Connect the supplied 15 pin D-sub to component video cable adapter to the RGB/YPbPr
jack on the back of the TV. Then connect component video cables to the adapter and connect
the other end to the component video jacks (Y, Pb, Pr) on the component. Connect the
supplied 3.5mm mini phone to audio cable adapter to the Audio In jack on the back of the TV.
Connect audio cables to the adapter and connect the other end to the Audio Output jacks on
the component.
Note: If you connect a component using the VID2 jacks, you need to set the VID2 source in
the Setup menu. Go to page 10 for more information.
Connection to a Personal Computer
Using VID2
Connect a personal computer to the TV using the VID2 RGB/YPbPr jack. Connect a 15-pin
monitor cable to the PC and the other end to the back of the TV.
Note: If you connect a component using the VID2 jacks, you need to set the VID2 source
in the Setup menu. Go to page 10 for more information.
The maximum panel resolution is 800 x 600. Be sure to set your PC to this monitor output
setting.
RGB/YPbPr
Audio Out
Audio In
+12V Output
VID2
AV component
16278150.01 Connections 12/11/03, 2:04 PM 7