Rinnai RHFE-750ETR - Manual (Page 4)

4 Rinnai Corporation RHFE-750ETR
Application Inbuilt only; for residential installation, commercial setting, or manufactured
home;
not designed for installation in a solid-fuel burning fireplace
General Description Inbuilt convector, glass and steel fronted, ceramic log space heater with
forced convection and power flue system
Operation Push button electronic / remote control
Gas Connection Flex line is 3/8 inch flare nut;
ball valve is 1/2 inch female x 3/8 inch flare
Gas Control Electronic
Burners Flame burners
Temperature Control Electronic thermostat
Logs Ceramic
Ignition System Electronic spark ignition
Flue System The flue must be terminated to atmosphere. Only flue components listed with
the appliance’s certification can be used. Warranty will be voided if non-listed
components are installed.
Fan 3 speed
Weight 154.3 lb (70 kg)
Electrical Connection AC 120V, 60 Hz
Specifications
Rinnai is continually updating and improving products. Therefore, specifications are subject to change without
prior notice.
Natural Gas Propane Gas
Minimum supply gas pressure 4.3 in (109 mm) W.C. 9.8 in (249 mm) W.C.
Maximum supply gas pressure 10.5 in (267 mm) W.C. 13.0 in (330 mm) W.C.
Manifold test pressure Factory Set Factory Set
BTU/hour input Natural Gas: Low - 10000 BTU/h; High - 29000 BTU/h
Propane:
Low - 10000 BTU/h; High - 28000 BTU/h
BTU/hour output Natural Gas: Low - 7850 BTU/h; High - 21900 BTU/h
Propane:
Low - 8050 BTU/h; High - 21840 BTU/h