RCA 3-8120 - Manual (Page 15)

More Special Functions
EN
14
Recalling Playback
Programs and Disc Titles
1. Load disc with playback program & disc
title stored. Display shows program
information and disc title alternately.
2. Start program playback (or
STOP to quit for normal
playback).
Erasing Disc Titles
1. Press and hold CD TITLE
for about 3 seconds to enter
erasing mode.
2. Press repeatedly to select
ERASE ONE (current) or
ERASE ALL disc title(s)
3. Confirm erasing (or STOP to
quit). SURE ? shows on display if
you select ERASE ALL. Press OK
again to re-confirm erasing.
Erasure takes only a few seconds.
Note: Playback program will also be erased if you
have created one and perform the above steps.
Display Messages
A> = Tray A is selected.
B> = Tray B is selected.
BLANK DISC = Disc is empty.
CLOSE = Tray is closing.
NO DISC = No disc in current tray.
READ = Player is reading disc information.
OPEN = Tray is open.
PLEASE WAIT = Player is under initialization.
STANDBY = Unit is in standby (off) mode.
PLAY
OK
SHIFT
0
CD TITLE
SHIFT
0
CD TITLE