RCA Scenium M50WH187 - Manual (Page 23)

Chapter
Using the Remote Control
Programming the remote to Operate
Other Devices
The universal remote can be programmed to operate many brands of remote-
controllable VCRs, audio devices, DVD players, cable boxes, satellite receivers
and other devices. In addition to being programmed to operate your television,
it’s already programmed to operate some RCA devices.
A second and third RCA TV can be programmed to any device button, except
the TV button.
Notes: The TV button can’t be programmed on this remote to control
any device; it controls only this TV.
The remote may not be compatible with all models of all brands of
devices. It also may not operate all functions of your device.
Find Out If You need to Program the remote
To determine whether the universal remote needs to be programmed to operate
one of the devices connected to your TV, such as a VCR, do the following:
1. Turn on the device (in this example, a VCR).
2. Point the remote at the device.
3. Press the corresponding device button (in this example, VCR).
4. Press ON•OFF to see if the VCR responds. If the VCR doesn’t respond, you
need to program the remote to operate it.
Programming the remote
There are three ways to program the remote control to operate other devices:
Direct Entry, Manual Code Search, and Automatic Code Search. If you have
recently purchased the device you want to control or if the device has many
codes, you might want to try the manual code search first.
Using Direct Entry
1. Turn on the device you want to control.
2. Look up the brand and code number(s) for the device in the code list at the
end of this section.
3. On your remote control, simultaneously press and hold the ON•OFF and
MUTE buttons (approximately 3 seconds) until a device button remains lit.
Then release the buttons.
4. Press and release the device button (SAT•CABLE, VCR, DVD, AUX or
AUDIO) you want to program.
5. Enter a three digit code from the code list.
INPUT ANT•CABLE
REVERSE PLAY FORWARD
STOP PAUSE RECORD
MENU CLEAR
FORMAT SUB
CH
INFO GUIDE
MUTE
GO BACK
VOL CH
ON•OFF
SAT•CABLE AUX DVD TV
MENU CLEAR
FORMAT INFO
GUIDE
SAT•CABLE VCR DVD TV
AUX AUDIO
INPUT ANT•CABLE
CC PRESETS SOUND
SUBCHANNEL SKIP
REVERSE PLAY FORWARD
STOP PAUSE RECORD
MUTE
GO BACK
VOL CH
ON•OFF
The darkened buttons are the device buttons
that can be programmed.
INPUT ANT•CABLE
REVERSE PLAY FORWARD
STOP PAUSE RECORD
MENU CLEAR
FORMAT SUB
CH
INFO GUIDE
MUTE
GO BACK
VOL CH
ON•OFF
SAT•CABLE AUX DVD TV
MENU CLEAR
FORMAT INFO
GUIDE
SAT•CABLE VCR DVD TV
AUX AUDIO
INPUT ANT•CABLE
CC PRESETS SOUND
SUBCHANNEL SKIP
REVERSE PLAY FORWARD
STOP PAUSE RECORD
MUTE
GO BACK
VOL CH
ON•OFF
You’ll use these darkened buttons for Direct
Entry.
remote model
r602a1
remote model
r401a1