Roberts Radio R9969 - Manual (Page 23)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
23
Setting various function modes
Using the Mode button and a two-digit code, which you enter using
the numerical buttons '1---0', you can change various functions:
Code Function Code Function
MODE 10 FM frequency change 11 FM frequency change in
* in 100 kHz steps 200 kHz steps
MODE 20 MW frequency change 21 MW frequency change in
* in 9 kHz steps 10 kHz steps
MODE 30 Time display in 12 hour 31 Time display in 24 hour
* format format
MODE 40 Signal tone off 41 Signal tone on
*
MODE 50 Arrange stations in 51 Arrange stations in
* sequence from low to sequence from low to
high frequency range high frequency range
To change the various function modes.
1. Press the Mode button.
2. Enter the desired code, shown in the table using the numbered
buttons '1---0'.
3. Press the Freq./Clock button to confirm.
3
1 2