Roberts Radio R9969 - Manual (Page 16)

16
Listening with Headphones
1. A Headphone Socket (3.5mm) located on left side of the receiver
is provided for use with either headphones or an earpiece. Inserting
a plug automatically mutes the internal loudspeaker.
Switching between stereo and mono reception
FM stereo reception is only available with headphones.
1. Connect the headphones and select an FM station.
2. Set the FM St./FM switch on the left side of the device to stereo.
The display indicates stereo has been selected.
3. If the reception of the station is weak in FM stereo, move the FM St./
FM switch to mono. The stereo symbol disappears from the display.
Setting the reception sensitivity
1. If the sensitivity is too high, set the DX./Local switch (on the left hand
of the receiver) to DX.
2. If the signal is too strong, and is causing distortion, move the DX./
Local switch to Local (low sensitivity).
1
2
3
1
2