Roland Edirol R-05 - Manual (Page 54)

55
Recording
In addition to recording instrumental performances
or voice memos via a mic, the R-05 lets you use the
LINE IN jack to record sound from a cassette or CD.
• The mic input will automatically be turned off if
you connect a device or cable to the LINE IN
jack. If you input sound via the LINE IN jack as
well as the MIC jack, only the sound from the
line input will be recorded.
• When connection cables with resistors are
used, the volume level of equipment
connected to the inputs (LINE IN) may be low. If
this happens, use connection cables that do
not contain resistors.
• If you want to record from a connected record
player, you’ll need to obtain a phono equalizer
separately.
In this example, we’ll explain how the sound from an
CD player can be recorded into the R-05.
fig.cdin.eps_60
1. Connect your CD player.
Use an audio cable to connect your CD player’s
line output jacks to the R-05’s LINE IN jack.
2. Adjust the recording level.
Adjust the recording level while playing back the
desired song on your CD player.
When you’ve finished adjusting the recording
level, set your player back to the beginning of
the song you’ll be recording.
Recording from a Cassette or CD
Using the LINE IN Jack
LINE IN jack To the line output jacks
of the CD player
R-05-e.book 55 ページ ２０１０年２月１９日 金曜日 午後４時５５分