Roland Edirol R-05 - Manual (Page 53)

54
Recording
Plug-in Power setting
Turn this setting “ON” if you’re using a plug-in
powered mic; turn it “OFF” if you’re using a mic that
uses a battery or does not require a plug-in power
supply.
1. Press [MENU] to access the “Menu” screen,
use [
]/[ ] to choose “Input Setup,”
and then press [ ].
fig.recoedersetting.eps_80
2. Use [ ]/[ ] to move the cursor to the
Plug-in Power setting, and use [ ]/[ ]
to choose ON or OFF.
fig.recoedersetting.eps_80
If you’ve connected a dynamic mic or a mic that
has an internal battery, you must turn Plug-In
Power OFF. Using the wrong setting may
damage your equipment.
(Default in bold)
Setting
OFF
Dynamic mic, or condenser mic with
an internal battery
ON Plug-in powered condenser mic
About dynamic mics
This type of mic is rugged, and is suitable for
recording vocals and instruments. It does not
require a power supply.
About condenser mics
This type of mic features high sensitivity, and is
suitable for recording lower-level sounds such as
acoustic instruments and conferences. It
requires power to be supplied from a battery or
via plug-in power.
R-05-e.book 54 ページ ２０１０年２月１９日 金曜日 午後４時５５分