RCA F19426 - Manual (Page 49)

Other Information
Chapter 4 47
Troubleshooting
No picture, no sound but TV is on
• Maybe the cable/air setting is set to the wrong position. Select GUIDE Plus+ Menu from the Main
menu, select the Setup option, and provide the correct information on the following screens. Go to
pages 16-17 for detailed instructions.
• The channel might be empty — change channels.
• If you’re watching your VCR and it’s connected with coaxial cable to the ANTENNA jack, tune the TV
to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also
check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button
on your VCR).
Sound okay, picture poor
• Check antenna connections. Make sure all of the cables are firmly connected to the jacks.
• Try adjusting sharpness function to improve weak signals. Go to page 42 for more instructions.
Black box appears on the screen
• Closed-captioning might be on. Check the Closed-Caption Display control panel in the Screen menu.
Go to page 42 for more instructions.
Every time I turn on the TV, the Guide is on the screen
• The GUIDE Plus+ system automatically appears on the screen when you use the POWER button on
the remote to turn on the TV. You can turn off this feature by pressing GUIDE on your remote control
and then press MENU to select the Menu bar. Press the right arrow button to select Setup. Choose
Review options and select OFF.
GUIDE Plus+ System Problems
GUIDE Plus+ setup won’t switch to channel 9 for VCR and/or channel 02 cable box
• Check to see if the G-LINK wands are positioned correctly in front of components’ remote sensors.
• GUIDE Plus+ system control of cable box is slower than direct control of the box itself. Keep this in
mind when changing channels.
• You may have an incorrect GUIDE Plus+ Channel Lineup. The guide may get out of sync with the
cable provider. Use the GUIDE Plus+ Setup in the GUIDE Plus+ Menu to change the zip code to 99999.
Turn the TV off for 10 minutes. Use Setup again to change the zip code back to the correct value. If
asked, be sure to select the correct channel lineup from the on-screen list.
Program information doesn’t download
• Review your setup information and make sure it’s correct. Press MENU on the remote and select
GUIDE Plus+ Setup. Go to page 16 for detailed instructions about the GUIDE Plus+ Setup menus.
• The TV must be off to download information. Leave your TV off overnight, for at least 10 hours, to
receive the initial download for your area.
• If you’re using a cable box, leave it on so you can receive program information.
(Continued on next page)
15720240.04 Other 4/9/02, 1:00 PM 47