RCA F19426 - Manual (Page 21)

Connections & Setup
Chapter 1 19
Tip
Leave your cable box turned ON to download
program information.
Leave your VCR turned OFF to record programs.
Note: If the GUIDE Plus+ system can’t locate
the correct code for the VCR, a list of
troubleshooting instructions appears to help
you before you try again.
• Try VCR configuration again: repeat
VCR setup.
• Test alternate codes: tests selected
brands and if this fails, the test
continues with all codes in the system.
• Skip this step: the system won’t be able to
automatically schedule programs to
record on your VCR.
Step 4: Confirming Your Settings
1. Check to make sure all settings are complete and
correct. If all settings are complete, highlight Yes, end
setup and press OK. If your cable box and/or VCR
code testing failed, you should see INCOMPLETE
where the cable box and VCR codes are listed. Once
setup is complete, additional screens appear.
If any settings are incomplete or incorrect, highlight
No, repeat setup process and press OK. Follow the
instructions on the screen.
2. You can choose to view a demo of the GUIDE Plus+
features, which may take a few minutes to load. If
you don’t want to see the demo right now, press OK
to watch TV.
What to Expect
The next time you turn on your TV, the GUIDE Plus+
system will appear on the screen. The following
examples explain what you might see:
• If all of the program information has been sent to
your TV, the GUIDE Plus+ system appears with all of
your TV program listings.
• If the program information hasn’t been sent to your
TV yet, an outline of the GUIDE (without TV
program listings) will appear on the screen. Program
information is usually sent to your TV at night.
• If the TV detected that you have multiple cable
companies in your area, STEP 5: Choosing Your
Channel Lineup appears.
Features of the GUIDE Plus+ system are explained in
Chapter 2.
To clear the guide from your screen, press CLEAR or
GUIDE on the remote control.
15720240.01 Setup 4/9/02, 1:00 PM 19