Factory reset, Splash duration, 6. crystal series lcd display splash screen – Runco CR-26HD User Manual
Page 50: Pre l iminar y
40
Runco CR-26HD/CR-32HDi Owner’s Operating Manual
PRE
L
IMINAR
Y
Factory Reset: To reset all Crystal Series LCD Display settings to their factory defaults,
select Factory Reset from the ISF Calibration menu and press ENTER. This command is
not undoable. Use it with caution!
Splash Duration: Use Splash Duration to control how long the Crystal Series LCD
Display splash screen remains on-screen after power-up; see Figure 4-6. To prevent this
screen from appearing, set the Splash Duration to 0.
Figure 4-6. Crystal Series LCD Display Splash Screen
CALIBRATED FOR:
John Doe By: Tinh Ho
CUSTOM BUILT BY:
This manual is related to the following products: