Runco CR-26HD - Manual (Page 37)

Operation
Runco CR-26HD/CR-32HDi Owner’s Operating Manual 27
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all Crystal Series LCD Display functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
Source From the Main Menu, select Source to choose a video signal source.
The active source is indicated by a green square (
■
) to its left; in the example at right, TV
is the active source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by a green square (
■
) to its right; in the
example at left, Anamorphic is selected.
Runco CR-26HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
■
TV
Input1
Input2
Input3
DVI
RGB
■
Anamorphic
Standard
Letterbox
VirtualWide
The aspect ratio selection persists until you change it. (It is not
saved independently for each input.)
Note