Roland V-Studio VS-20 - Manual (Page 23)

23
Connections
fig.connectFS.eps
You can use footswitches to control the Guitar Tracks 4.
* Footswitch pedal and Expression pedal are not included.
926a
* When connection cables with resistors are used, the volume level of equipment connected to the INPUT connectors
may be low. If this happens, use connection cables that do not contain resistors.
983
* Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
* Do NOT connect anything to input terminals that you are not using.
925 modified
* Use only the specified expression pedal (Roland EV-5, BOSS FV-500L, FV-500H; sold separately). By connecting any
other expression pedals, you risk causing malfunction and/or damage to the unit.
Connecting footswitches (optional)
Function
Footswitch 1 Playback
Footswitch 2 Recording
B A
White
(TIP)
Red
(RING)
Roland PCS-31L
Roland PCS-33
BOSS FS-5U BOSS FS-6
Footswitch 1 Footswitch 2 Footswitch 2 Footswitch 1
TIP
RING
Polarity Switch
Set the switches as shown bellow.
Expression
Pedal
VS-20_e.book 23 ページ ２０１０年１月１８日 月曜日 午前９時８分