RadioLAN DockLINK User Manual
Page 72
890-010 12/04/98
Page 64
© 1998 RadioLAN.
The DockLINK uses an RJ11 jack for connection to the terminal. Use of this port requires a special interface cable
that connects between the Serial Port jack and a DB9F serial connector. The pin-outs for this cable are shown in
Table 2.
Signal Description
DB-9F RJ11 Signal Description
Ground
2
1
Ground
Serial Out (from computer)
3
2
Rx In
Serial In (to computer)
5
4
Tx out
Table 2: Serial Port Adapter Cable Pin-outs