Connecting the docklink – RadioLAN DockLINK User Manual

Page 19

Text mode
Original mode

890-010 12/04/98

Page 11

Connecting the DockLINK

You must connect the DockLINK to the station’s
10BaseT Network Interface Card and to the power
adapter. Optionally, you can also connect a modem
or VT-100 terminal to the DockLINK for local
configuration. Follow these steps to connect
external cabling to the DockLINK:

1. Connect the radio to the female DB15 jack on

the DockLINK. The radio’s connector is keyed,
and only inserts into the jack one way. Do not
force the connector into the jack.

2. Connect the power adapter cable to the

DockLINK.

3. Plug the power adapter into an electrical outlet.

Local Station’s

Network Interface Card

Figure 7: Connecting the DockLINK