Rinnai FS35ETRSN/US - Manual (Page 13)

13
1. Flue connection and proper venting
2. Warm air distribution.
3. Adequate air supply.
4. The heater must not be installed where
curtains or other combustible materials
could come into contact with it. In some
cases, curtains may need restraining.
See below for minimum clearances
required.
LOCATION
When positioning the heater, the main points governing the location are:
5. The heater is not designed to be built
into bookcases or shelves or any
combustible opening.
6. Check that room ventilation complies
with local regulations.
7. Installation location shall provide
adequate combustion and ventilation air.
8. A gas appliance must not be connected
to a chimney flue serving a separate
solid-fuel burning appliance.
15”
ABOVE
15”
RIGHT
15”
LEFT
15”
FRONT