RayTek ThermoView Ti30 - Manual (Page 54)

Note
2:
If you wish to restore the default parameters on the unit press the Restore button.
By doing this all 100 locations on the imager will be restored with the factory
parameters. These default parameters are:
Location
name: blank
Emissivity: 1.00
RTC: OFF
Low alarm: 0°C / 32° F
High alarm: 250°C / 482° F
Comments: blank
July 1, 2003 - 54 - Version 1.0
i i
Tel: (01943) 602001- WWW.ISSLTD.CO.UK - Fax: (01943) 816796