Runco 53SBX59B - Manual (Page 28)

PICTURE-IN-PICTURE (PIP)
28
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan.
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF mode PIP is allowed only when ANT A is selected as the main channel.
NOTES: 1. The SWAP button will only operate when SINGLE PIP mode or split mode PIP is chosen.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
a sub-picture.)
PICTURE-IN-PICTURE CONT.
SURF MODE PIP
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along
the left and bottom edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen.
ባ
SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
ANT A 28
PIP PIP
SWAP
SWAP
ANT A 10
VIDEO: 1
VIDEO: 1
ANT A 10
SINGLE
SPLIT
SURF
ANT A 10
VIDEO: 1
ANT A 10
VIDEO: 1
ANT A 10
VIDEO: 1
MOVE MOVE MOVE
ANT A 10
VIDEO: 1
03
06
07
08 09 10 12
ቤ
MOVE button
To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counterclockwise every
time the MOVE button is pressed.
ANT A 10 VIDEO: 1 VIDEO: 1 ANT A 10
SINGLE
SPLIT
SURF
SINGLE
SPLIT
SURF
SINGLE
SPLIT
SURF
SINGLE
SPLIT