Radio Shack ET-3507 - Manual (Page 13)

13 Operation
To send an intercom signal from the cordless handset to
the corded phone, press
INTCM on the cordless handset.
?DJ;H9EC ?DJ;H9EC ?DJ;H9EC ?DJ;H9EC
appears on both the corded phone’s and the
cordless handset’s displays. The corded phone beeps for
about 15 seconds. Press
PAGE/INTERCOM on the corded
phone to talk with the cordless handset. The channel,
?DJ9C ?DJ9C ?DJ9C ?DJ9C
and the volume level appear on both the corded
phone’s and cordless handset’s displays. Pick up the
corded handset to talk if you do not want to use the
speakerphone.
To exit the intercom mode, press PAGE/INTERCOM or
SPEAKER on the corded phone, or INTCM or TALK on the
cordless handset.
Note: If an incoming call is detected while using the
intercom, the corded phone and the cordless handset
beep about once every 4 seconds and the NEW CALL
indicator on the corded phone flashes. To answer the
call, press SPEAKER on the corded phone or
TALK on
the cordless handset, or pick up the corded handset.
TRANSFERRING A CALL
Between the Corded Handset and the
Speakerphone
To transfer a call from the speakerphone to the corded
phone, pick up the corded handset. The speakerphone
turns off and the call is transferred to the corded handset.
The SPEAKER indicator turns off.
To transfer a call from the corded phone to the
speakerphone, press
SPEAKER . The call is transferred to
the speakerphone, and the SPEAKER indicator turns on.
Place the corded handset in its cradle.
From the Corded Phone or the
Speakerphone to the Cordless Handset
1. Press PAGE/INTERCOM on the corded phone to page
the cordless phone. The call is placed on hold.
F7=?D= F7=?D= F7=?D= F7=?D=
appears on both the corded phone’s and the
cordless handset’s displays, and the cordless
handset beeps.
2. Press INTCM on the cordless handset to talk to the
corded phone.
3. Press SPEAKER on the corded phone or hang up the
corded handset to transfer the call to the cordless
handset.
From the Cordless Handset to the Corded
Phone
1. Press INTCM on the cordless handset to hold the call
and send an intercom signal to the corded phone.
?DJ;H9EC ?DJ;H9EC ?DJ;H9EC ?DJ;H9EC
appears on both the corded phone’s and
the cordless handset’s displays. The corded phone
beeps.
2. Press PAGE/INTERCOM on the corded phone to talk
to the cordless handset.
3. Press TALK on the cordless handset to transfer the
call to the corded phone.
CONFERENCING
You can use the corded phone and the cordless handset
to talk with an outside line at the same time.
When the corded phone is in use, press TALK on the
cordless handset to start the conference call.
When the cordless handset is in use, pick up the corded
handset or press
SPEAKER to join the conversation.
87I; 87I; 87I; 87I;
?D ?D?D ?D KI; KI; KI; KI;
appears on the cordless handset.
>7D:I;J >7D:I;J >7D:I;J >7D:I;J ?D ?D?D ?D KI; KI; KI; KI;
appears on the corded phone. Both phones sound three
short beeps.