beautypg.com

Making and answering a call, Corded phone cordless handset, Adjusting the volume – Radio Shack ET-3507 User Manual

Page 12: Using tone services on a pulse line, Using page/intercom

background image

12

Operation

MAKING AND ANSWERING A CALL

Corded Phone

To make a call using the corded phone, pick up the
corded handset or press

SPEAKER

to use the

speakerphone. You hear a dial tone and

;DJ;H

;DJ;H

;DJ;H

;DJ;H

DKC8;H

DKC8;H

DKC8;H

DKC8;H

5555

appears (if you are using speakerphone, the red
SPEAKER indicator also lights). Dial the desired number.

Note: When you press

∗∗∗∗

or

####

, the corded phone’s

display shows

7777

or

XXXX

respectively.

To answer a call, pick up the corded handset or press

SPEAKER

.

To end a call, press

SPEAKER

or return the corded

handset to its cradle.

Note: Even when there is an AC power failure and no
battery is installed in the corded phone, you can still
make and receive calls using the corded handset. But
you cannot use the cordless handset or the
speakerphone, or other functions of the phone.

Cordless Handset

To make a call using the cordless handset, lift the
cordless handset, then press

TALK

.

M7?J?D=

M7?J?D=

M7?J?D=

M7?J?D=

appears.

When the cordless handset links up with the corded
phone, the channel, call duration timer and the receiver
volume level appear. You hear a dial tone. Dial the
desired number.

To answer a call, lift the cordless handset, then press

TALK

.

To end a call, press

TALK

or place the cordless handset

on its cradle.

Notes:

• The call duration timer starts counting from

&&0&&

&&0&&

&&0&&

&&0&&

when you dial the number or receive a call, and
stops counting when you hang up the phone. The
call duration appears briefly after you hang up the
phone.

• When you press a button, a single tone indicates

that the phone has accepted the command. Three
tones indicate that you pressed a button in error, or
there is severe interference.

• If interference is severe, the cordless handset might

lose communication with the corded phone and the
call might disconnect. If this happens, reset the
cordless handset’s security access-protection code
(see “Resetting the Security Access-Protection
Code” on Page 9).

ADJUSTING THE VOLUME

Corded Phone

To adjust the corded handset’s volume, pick up the
corded handset, then repeatedly press

VOLUME

8

8

8

8

or

9

9

9

9

. The volume level (up to 4 levels) you selected

appears. The volume level remains set after you hang
up.

To adjust the speakerphone’s volume, press

SPEAKER

,

then repeatedly press

VOLUME

8

8

8

8

or

9

9

9

9

. The volume

level (up to 8 levels) you selected appears. The volume
level remains set after you press

SPEAKER

again.

Cordless Handset

To adjust the cordless handset’s volume, press

TALK

.

Then repeatedly press

VOL/CID

8

8

8

8

or

9

9

9

9

. The volume

level (up to 4 levels) you selected appears. The volume
level remains set after you hang up.

Note: The corded phone or the cordless handset sounds
3 beeps when you reach the lowest or highest listening
level.

USING TONE SERVICES ON A
PULSE LINE

Some special services, such as bank-by-phone, require
tone signals. If you have pulse service, you can still use
these tone services by following these steps:

1. Dial the service’s main number.

2. When the service answers, press

TONE/

∗∗∗∗

/VIP

on the

cordless handset or

TONE/

∗∗∗∗

on the corded phone.

Any additional numbers you dial are sent as tone
signals.

3. After you complete the call, hang up the phone. The

phone automatically resets to pulse dialing.

USING PAGE/INTERCOM

Using the corded phone, you can send a page to the
cordless handset to locate it when it is away from the
charging cradle and not in use. You can use the corded
phone’s intercom feature to carry on a conversation with
a person using the handset.

To page the cordless handset, press

PAGE/INTERCOM

on

the corded phone. The cordless handset beeps for about
15 seconds. Hold down

PAGE/INTERCOM

for about 3

seconds. The cordless handset beeps for about 1
minute.

F7=?D=

F7=?D=

F7=?D=

F7=?D=

appears on both the corded phone’s and

the cordless handset’s displays. Press

INTCM

on the

cordless handset to talk with the corded phone. The
channel,

?DJ9C

?DJ9C

?DJ9C

?DJ9C

and the volume level appear on both the

corded phone’s and cordless handset’s displays.