Radio Shack ET-3507 - Manual (Page 11)

11 Operation
ˆ
Operation
A QUICK LOOK AT YOUR PHONE
REDIAL — To quickly redial the last number dialed, pick up the corded
handset or press
SPEAKER , then press REDIAL .
To redial a busy number, press REDIAL without hanging up the phone.
appears and a dial tone sounds for about 2 seconds, then
the number automatically redials.
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as
well as local numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a
Pause” on Page 14).
FLASH — provides the electronic equivalent of a switchhook
signal for special phone services such as Call Waiting.
If you have Call Waiting, press
FLASH to answer an incoming call
without disconnecting the current call. appears. Press
FLASH again to return to the first call. appears.
Note: If you do not have any special phone services, pressing
FLASH might disconnect your current call.
MUTE — To talk to someone else in the room
without the person on the other end of the phone
line hearing your conversation, press
MUTE on
the corded phone.
CKJ; CKJ; CKJ; CKJ;
appears. Press MUTE
again to resume your phone conversation.
REDIAL — To quickly redial the last number dialed, press TALK then REDIAL/CALL
BACK .
To redial a busy number, press REDIAL/CALL BACK without hanging up the phone.
appears and a dial tone sounds for about 2 seconds, then the
number automatically redials.
Notes:
The redial memory holds up to 32 digits, so you can redial long-distance as well as local
numbers.
The redial memory can also store tone entries and pause entries
(see “Using Tone Services on a Pulse Line” on Page 12 and “Entering a Pause” on
Page 14).
FLASH/DELETE —
provides the electronic
equivalent of a
switchhook signal for
special phone services
such as Call Waiting.
If you have Call Waiting,
press
FLASH/DELETE
to answer an incoming
call without
disconnecting the current
call.
appears.
Press FLASH/DELETE
again to return to the first
call.
appears.
Note: If you do not have
any special phone
services, pressing
FLASH/DELETE might
disconnect your current
call.
CH — If you hear interference during a call,
repeatedly press
CH on the
cordless handset to change the
channel until you hear a clear one.