Radio Shack CD Player - Manual (Page 17)

17
• During program playback, press
B
once to return to the beginning of the
current track. To return to the beginning
of the previous track in the program,
press
B
twice. To playback the next
track in the program, press
C
. You
cannot use the numeric buttons on the
remote control.
• When using the remote control, select
the tray by pressing CD or CD-R before
pressing F or J
.
Searching For a Part of a Track
During playback, hold down
B
or
C
on
the CD recorder and release it when you
find the section you want to listen to.
When using the remote control, select the
tray by pressing
CD or CD-R and then press
and hold
@
or
I
.
Directly Selecting a Track
Press CD or CD-R to select the tray and then
press the numeric buttons on the remote
control to select the track. Playback starts
from the selected track.
To play tracks 1 through 9, simply press the
appropriate button (1 through 9).
To play a track that has a higher number
than 9, press
+10 appropriate number of
times to set the “tens” digit of the track
number, followed by a single button to set
the digit for less than 10.
Notes:
• If you press the numeric button in the
pause mode, the CD recorder enters
pause mode at the beginning of the
selected track.
• Direct playback is not possible during
shuffle playback and program playback.
Repeat Play
Your CD recorder can repeat a single track,
tracks on both CDs of the PLAYBACK tray
and the RECORD/PLAYBACK tray, a
programmed sequence, or a designated
section.
Repeating One Track
Press REPEAT 1/ALL . REPEAT 1 appears
during playback. The CD recorder plays
back the track repeatedly. If you select
another track in
REPEAT 1 mode, the CD
recorder repeatedly plays back the track you
just selected. You can also select a track in
the stop mode. Press
REPEAT 1/ALL and
then select the track number using the
numeric buttons.
Repeating All of the Tracks
Press REPEAT 1/ALL twice. REPEAT
ALL appears. The CD recorder repeatedly
plays all the tracks on the disc. During
program playback, the CD recorder
repeatedly plays back programmed tracks.