Repose R500 - Manual (Page 19)

REPOSE R500 User Guide
Page 18 of 20
Maintenance and Cleaning
WARNING: Always unplug the power cord before cleaning your massage lounger. Never touch a
power plug with wet hands. Failure to follow these instructions may lead to electrocution or burns.
NOTICE: Please do NOT use volatile chemicals such as paint thinners, benzene, or alcohol on
any part of your massage lounger.
Fabric
1. Wipe the seat fabric with a damp cloth using water and a very mild
detergent.
2. Use a clean damp cloth to wipe the fabric to remove residue.
3. Allow to air dry.
Plastic Areas
1. Use a damp cloth with water and a very mild detergent to wipe down
exposed plastic areas.
2. Use a clean damp cloth to remove any residue.
3. Allow the cleaned parts to air dry.
Control Panel
If the control panel becomes soiled, wipe with a soft cloth moistened lightly with
water only. Excess moisture or detergents can damage the control panel.