Repose R500 - Manual (Page 18)

REPOSE R500 User Guide
Page 17 of 20
User Preferences
If you wish to save favorite massage settings, you can save massage
preferences for three users in six (6) save points for a total of eighteen (18)
settings. All massage parameters such as speed and intensity are saved along
with the massage mode.
To save your settings:
1. Press Stop to put the lounger in Standby mode.
2. Select User A, B, or C.
3. Select a number using the “+” and “-“ buttons.
4. Press Enter. Note: If a setting has already been saved, see “To modify a setting” if
you wish to change a previously saved setting.
5. Select the desired massage functions.
6. Press Save.
To recall a setting:
1. Press Stop to put the lounger in Standby mode.
2. Select User A, B, or C.
3. Use the “+” and “-“ buttons to select the number you wish to use.
4. Press Enter.
To modify a setting:
1. Press Stop to put the lounger in Standby mode.
2. Select User A, B, or C.
3. Use the “+” and “-“ buttons to select a number to modify.
4. Select the desired massage functions.
5. Press Save.