Repose R500 - Manual (Page 10)

REPOSE R500 User Guide
Page 9 of 20
Preparing for Use
NOTICE: Before use, be sure the power plug is inserted completely into a grounded wall outlet.
Never use the massage lounger without proper grounding. If you are unsure, please consult an
electrician.
Grounding Your Massage Lounger
Your massage lounger is equipped with a grounded power plug and must be
plugged into a properly grounded wall outlet. Grounding allows the electric
current to flow to the earth helping to reduce the risk of electric shock if a failure
occurs.
Do not modify the power plug or use an adapter to bypass the ground.
If you are unsure about adequate grounding, please consult an electrician.
Moving the Massage Lounger
Your Repose massage lounger has wheels on the back of the base that are used
for moving your lounger.
Please be very careful while attempting to move your massage lounger. We
recommend you have someone help you move the lounger.
NOTICE: Disconnect the power cord prior to moving and do not attempt to move the massage
lounger while someone is seated on it.
To move your massage lounger:
1. Position the leg rest in the
raised position.
2. Remove the power plug from
the wall outlet and secure the
power cord on the lounger.
3. While holding both sides of the
leg rest, carefully lift the front of
the lounger. Please be very
careful, the massage lounger is
bulky and heavy.
NOTICE: If you have hard flooring surfaces, you may want to place a mat on the floor and gently
roll the massage lounger to avoid damaging the floor.
If you are using your lounger on a
hardwood surface, we recommend you protect your floor by placing something under your
lounger such as a rug.