Repose R500 - Manual (Page 15)

REPOSE R500 User Guide
Page 14 of 20
Raising and Lowering the Leg Rest
To raise the leg rest:
1. Be sure the area in front of the leg rest is free of obstacles.
2. Press and hold the raise leg rest button. The leg rest will stop
automatically when it reaches the highest point.
To lower the leg rest:
1. Be sure the area below the leg rest is free of obstacles.
2. Press and hold the lower leg rest button. When the leg rest reaches the
lowest position, it will stop.
Note: Pressing the power button will also raise the backrest and lower the
leg rest while resetting the lounger.
After using your massage lounger:
1. Press the Stop button on the control panel.
2. To reset the lounger, press the power button. This will raise the backrest
and lower the leg rest.
3. Be sure to unplug the power cord if the lounger is not going to be used
again.