Riccar R-SERIES R500 R800 - Manual (Page 9)

8
Operation
Replacing vacuum bag
Genuine Riccar vacuum bags should
be used for best performance and air filtration.
Always operate the vacuum cleaner with a
vacuum bag installed.
NOTE: If secondary or post filters need to be
replaced, see page 9 before replacing the
vacuum bag.
1. Remove the used vacuum bag by pulling bag
collar off the bag holder [Fig. 10]. Do not re-use
filled vacuum bags.
. Attach the new vacuum bag onto the
bag holder.
. Re-insert the tab on bottom edge of bag
compartment cover into the groove on the
bag compartment housing [Fig. 11]. Press it
into place and close the bag compartment
cover tightly.
Fig. 10
Fig. 11