Riccar R-SERIES R500 R800 - Manual (Page 11)

10
Operation
Removing and reinstalling bottom plate
CAUTION: Disconnect the vacuum cleaner
from the electrical outlet before removing the
bottom plate.
1. Depress handle release pedal twice and place
the vacuum cleaner in the low position.
. Turn vacuum cleaner over, exposing the
underside [Fig. 15].
. Slide locking latch to the right [Fig. 16].
4. Press tabs inward on each side [Fig. 17] and
pull bottom plate off.
5. Reinstall by placing lower edge of bottom plate
along lower edge of nozzle [Fig. 18]. Snap
plate into place. Slide locking latch to the left to
secure.
Fig. 15
Fig. 16
Fig. 17
Fig. 18