Assembly – RIDGID R844 User Manual

Page 9

UNPACKING

This product has been shipped completely assembled.
n

Carefully remove the tool and any accessories from the

box.

Make sure that all items listed in the packing list are

included.

Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call

1-866-539-1710 for assistance.

PACKING LIST

18 Volt Reciprocating Saw
Charger
Battery Pack
Saw Blade (3)
Hex Key
Tool Bag
Operator’s Manual

WARNING:

If any parts are missing do not operate this tool
until the missing parts are replaced. Failure to
do so could result in possible serious personal
injury.

WARNING:

Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.

ASSEMBLY

TO INSTALL SAW BLADE

See Figure 2.
n

Lift the blade clamp lock/release lever located on the side

of the saw.

Insert saw blade between blade clamp and saw bar.

Lock the blade clamp lever.

Fig. 2

BLADE

CLAMP