Razor Electric Punk - Manual (Page 5)

5
adjusted and maintained on a regular basis. Check or have them
checked and adjusted by a qualified mechanic. Worn brake parts,
stretched or frayed inner wires or a kinked housing indicate brake
service or parts replacement may be necessary for proper function.
4. Assembly
WARNING: Razor highly recommends that you have your Electric
Punk assembled by an experienced, adult mechanic. Many retailers
provide assembly but some charge extra. If your retailer can’t do the
assembly, you can have your Electric Punk assembled at a bicycle shop
for a fee. Although you may have to pay up to $20 or even more for
assembly, it will assure the Electric Punk is properly assembled and
adjusted.
ASSEMBLY NOTE: Refer to the list of tools required for assembly
on page three of this manual. If you do not have the proper tools or
understanding of the instructions in this manual, take your bike to a
qualified mechanic for assembly, service or adjustments.
4A. Un-box. Remove contents from box (Figure 2). Remove the foam
separators that protect the various components from damage during
shipping. Inspect the contents of the box for scratches in the paint,
dents or kinked cables that may have occurred during shipping. Your
Electric Punk was partially assembled and packed at the factory to
prevent shipping damage and there should not be any problems, even if
the box has a few scars or dents. But if there are, contact Razor
immediately to resolve any problems.
Figure 2.