RCA 27F534T - Manual (Page 10)

VIDEO OUT VIDEO IN COMPONENT IN VIDEO2 IN
S-VIDEO IN
ANTENNA/CABLE
ANALOG INPUT
ANTENNA/CABLE
DIGITAL INPUT
COMPONENT IN
COMPONENT VIDEO
Y Pb Pr
VIDEO
INPUT
L R
AUDIO
VIDEO
OUTPUT
S-VIDEO
OUT
S-VIDEO
IN
L R
AUDIO
L R
AUDIO
VIDEO IN
Back of TV
DVD Player
2
3
Go to page 5 for
instructions on
getting a signal.
IMPORTANT - If you aren’t receiving a picture with this connection, the problem
might be with your DVD player. If the DVD player is a “progressive scan” DVD player,
you need to change the setting from progressive to interlace. The procedure for
changing this on a DVD player varies. Look for a button on the front of the DVD player
(it might be called resolution or display), or see if there is a switch on the back (it might
be labeled “int/prog” or something similar), or the item might be in the menu system of
the DVD player. Consult your DVD player owner’s manual for instructions.
Connecting the Device
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a DVD
player. If the device you are connecting also has S-Video or composite video, we recommend
you use the component video input for better quality.
The illustration shows how to connect a DVD to your TV using component (Y Pb Pr) and
audio cables.
Y Pb Pr Connection
Continues on next page...
Connections & Setup
8 Chapter 1