Remington Power Tools 104317 - Manual (Page 21)

ENGLISH
1 www.desatech.com
cLEaNING aND MaINtENaNcE
rEpLacING Saw cHaIN
Replace chain when cutters are too worn to
sharpen or when chain breaks. Only use replace-
ment chain noted in this manual. Always include
new drive sprocket when replacing chain. This
will maintain proper driving of chain. Note: For
proper chain and drive sprocket, see Parts List,
page 74.
Replacement saw chains may be available at your
local hardware or home improvement store.
The following list gives the specifications for
replacement chains.
All chains will be .050 gauge, 3/8 pitch.
8" chainsaws have 34 drive links
10" chains have 39 drive links
You may also order the replacement saw chains
from the "Online Outlet" at www.desatech.com
using the part number listed in the illustrated parts
list on pages 72-74 of this manual.
StoraGE
If storing saw for more than 30 days, follow steps
below:
1. Drain oil tank after each use.
2. Remove and clean guide bar and chain. Clean
guide bar and chain by soaking in petroleum
based solvent or mild soap and water mix-
ture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This
will prevent rust.
5. Wipe a thin coating of oil over surface of guide
bar.
6. Wipe off outside of saw body. Do this with soft
cloth dampened with a mild soap and water mix-
ture.
7. Store chain saw
• in a high or locked place, out of children’s
reach
• in a dry place
tEcHNIcaL SErvIcE
You may have further questions about assembling, op-
erating, or maintaining this product. If so, you can visit
our Technical Service web site at www.desatech.com or
contact our Technical Service Department at 1-800-626-
2237 (English Only). You may also write to:
DESA Power Tools
ATTN: Technical Service
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Power Tools, have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (Include copy of
receipt for written requests).
rEpLacEMENt partS
aND accESSorIES
For original replacement parts and accessories,
contact your nearest Authorized Dealer or Au-
thorized Service Center for this product. If they
can not supply the part or accessory, contact your
nearest Parts Central listed on page 75. Each Au-
thorized Dealer, Authorized Service Center, and
Parts Central is independently owned and oper-
ated. You may also order parts from the "Online
Outlet" at www.desatech.com.
See pages 72 through 74 for an Illustrated Parts
List.
If you need additional referral information, contact
our Technical Service Department (see Technical
Service).
In Canada call 1-800-561-3372 for parts and service
information.
warNING: Use only replacement
parts and accessories described in this
manual. Use of other parts or accessories
could damage saw or injure operator.
We reserve the right to amend these specifications
at any time without notice. The only warranty
applicable is our standard written warranty. We
make no other warranty, expressed or implied.